Controlled growth for synthesizing a compact mordenite membrane

Controlling the growth of zeolite crystals on a porous alumina support is essential for preparing a compact zeolite membarne. First, mordenite seed crystals applied on a nonporous -alumina disk were grown and morphological change of mordenite crystals were observed in the course of growth. Then, mordenite membranes were synthesized on a porous -alumina tube under the same conditions employed in the study using the alumina disks. We found that seed crystal growth was widely controllable by changing water content in reaction solution, which resulted in better control of the morphology of mordenite crystals for synthesizing a thin compact mordenite membrane. Separation properties for mordenite membranes were studied in water–hydrogen binary system at 473 K with 10 kPa of water partial pressure, where no capillary condensation was expected in non-zeolitic pores. Separation factor for a mordenite membrane with a few defects was poor; however, a defect-free mordenite membrane prepared under a suitable condition highly separated steam from hydrogen.     

Preparation of high performance nanocomposite elastomer: effect of reaction conditions on in situ silica generation of high content in natural rubber

Effect of amines on an in situ silica generation in natural rubber was investigated, and n-hexylamine, n-heptylamine and n-octylamine were found to increase the in situ silica content. The nanometer sized silica particles up to ca. 80 parts per hundred rubber by weight were generated in situ in the rubber matrix via a sol–gel reaction of tetraethoxysilane. Additionally, dispersion of the silica in the rubbery matrix was more homogeneous than that of commercial silica dispersed by a conventional mechanical mixing. In this in situ silica generation, the polarity and solubility in water of amine were influential factors for controlling the in situ silica content in the rubbery matrix. The obtained high in situ silica filled natural rubber was useful to prepare high performance nanocomposite elastomers.     

Trends in speciation analysis of vanadium in environmental samples and biological fluids--a review

A comprehensive review is presented addressing recent trends in the speciation and determination of vanadium in environmental and biological sample matrices, including important analytical aspects such as sample clean up, pre-concentration and method development. Methodology based on both separation and spectroscopic techniques for the determination of vanadium speciation is discussed. A brief outline of analytical principles, together with an overview of the recent developments and applications of vanadium speciation determination is included. The newer methods for detecting metal ions including hyphenated spectroscopic techniques and sample preparation schemes are also discussed.     

树脂吸附法分离纯化桑叶总黄酮——（Ⅱ）动态法分离桑叶总黄酮的工艺条件及数学模拟

考察了H103树脂固定床吸附分离桑叶总黄酮的工艺参数,并对吸附工艺进行了数学模拟和比较.实验结果表明,H103树脂固定床吸附分离桑叶总黄酮在上样浓度6.05mg/mL时,以9mL/min上样,吸附完全后用60%乙醇以4.5mL/min流速洗脱,桑叶总黄酮产品的回收率为90.57%,纯度为76.33%,建立的固定床吸附模型为预测固定床吸附桑叶水提液中桑叶黄酮达到穿透点时间及固定床吸附容量提供了准确、快捷的方法.     

A Microporous Hydrogen-Bonded Organic Framework Based on Hydrogen-Bonding Tetramers for Efficient Xe/Kr Separation

Hydrogen-bonded organic frameworks (HOFs) have been emerging as a new type of very promising microporous materials for gas separation and purification, but few HOFs structures constructed through hydrogen-bonding tetramers have been explored in this field. Herein, we report the first microporous HOF (termed as HOF-FJU-46) afforded by hydrogen-bonding tetramers with 4-fold interpenetrated diamond networks, which shows excellent chemical and thermal stability. What's more, activated HOF-FJU-46 exhibits the highest xenon (Xe) uptake of 2.51 mmol g⁻¹ and xenon/krypton (Kr) selectivity of 19.9 at the ambient condition among the reported HOFs up to date. Dynamic breakthrough tests confirmed the excellent Xe/Kr separation of HOF-FJU-46a, showing high Kr productivity (110 mL g⁻¹) and Xe uptake (1.29 mmol g⁻¹), as well as good recyclability. The single crystal X-ray diffraction and the molecular simulations revealed that the abundant accessible aromatic and pyrazole rings in the pore channels of HOF-FJU-46a can provide the multiple strong C−H⋅⋅⋅Xe interactions with Xe atoms.     

Photo-Driven Quasi-Topological Transformation Exposing Highly Active Nitrogen Cation Sites for Enhanced Photocatalytic H2O2 Production

Herein, the exposure of highly-active nitrogen cation sites has been accomplished by photo-driven quasi-topological transformation of a 1,10-phenanthroline-5,6-dione-based covalent organic framework (COF), which contributes to hydrogen peroxide (H₂O₂) synthesis during the 2-electron O₂ photoreduction. The exposed nitrogen cation sites with photo-enhanced Lewis acidity not only act as the electron-transfer motor to adjust the inherent charge distribution, powering continuous and stable charge separation, and broadening visible-light adsorption, but also providing a large number of active sites for O₂ adsorption. The optimal catalyst shows a high H₂O₂ production rate of 11965 μmol g⁻¹ h⁻¹ under visible light irradiation and a remarkable apparent quantum yield of 12.9 % at 400 nm, better than most of the previously reported COF photocatalysts. This work provides new insights for designing photo-switchable nitrogen cation sites as catalytic centers toward efficient solar to chemical energy conversion.     

Modular Customization and Regulation of Metal–Organic Frameworks for Efficient Membrane Separations

Metal–organic frameworks (MOFs) are considered ideal membrane candidates for energy-efficient separations. However, the MOF membrane amount to date is only a drop in the bucket compared to the material collections. The fabrication of an arbitrary MOF membrane exhibiting inherent separation capacity of the material remains a long-standing challenge. Herein, we report a MOF modular customization strategy by employing four MOFs with diverse structures and physicochemical properties and achieving innovative defect-free membranes for efficient separation validation. Each membrane fully displays the separation potential according to the MOF pore/channel microenvironment, and consequently, an intriguing H₂/CO₂ separation performance sequence is achieved (separation factor of 1656–5.4, H₂ permeance of 964–2745 gas permeation unit). Taking advantage of this strategy, separation performance can be manipulated by a non-destructive modification separately towards the MOF module. This work establishes a universal full-chain demonstration for membrane fabrication-separation validation-microstructure modification and opens an avenue for exclusive customization of membranes for important separations.     

Precise analysis of thyroxine enantiomers in pharmaceutical formulation by mobility difference based on cyclodextrin

Identification and determination of chiral pharmaceutical residues is still a challenging analytical puzzle. In this work, a simple, rapid, and effective method for chiral D/L-tetraiodothyronine (T4) separation and quantitative was developed based on host–guest recognition using ion mobility spectrometry-mass spectrometry (IMS-MS). The D/L-T4 enantiomers were mobility separated by their diastereomeric complexes through mixing with cyclodextrin (CD) and metal ions. D/L-T4 was first separated by complexing with host molecule (α-, β-, γ-CD), observing weak peak-to-peak resolution (R_p-p) by the formed binary complex [CD + D/L-T4-H]⁺, and the R_p-p decreased with the CD size increasing. However, the separation effect of D/L-T4 was much improved with the addition of divalent metal ions (G²⁺) by the formed ternary complex [CD + D/L-T4 + G]²⁺. In comparison, α-CD related complexes can possess the best separation effect for D/L-T4 in most cases. Considering the high selectivity, non-toxic, and chemically stable of β-CD, [β-CD + D/L-T4 + Ca]²⁺ was selected for D/L-T4 analysis (R_P-P = 0.764). Whereafter, chemical theoretical conformations for [β-CD + D/L-T4 + H]⁺ and [β-CD + D/L-T4 + Ca]²⁺ were optimized, discovering similar micro-interaction modes between [β-CD + D-T4 + H]⁺ and [β-CD + L-T4 + H]⁺; while with the addition of Ca²⁺, significantly different interaction modes were observed between [β-CD + D-T4 + Ca]²⁺ and [β-CD + L-T4 + Ca]²⁺. And theoretical collision cross section (CCS) trends for the complexes were consistent with that of the experimental results. Additionally, calibration curves were linear within 1.00 to 10⁴ ng mL^?1 with coefficient (R² > 0.99), gaining the limit of detection (LODs) calculation of 0.11 ng mL^?1, and the detection range between D-T4 and L-T4 of 45.6:1 to 1:59.8. Finally, the method was applied for D/L-T4 detection in Levothyroxine tablets, the detection content has good consistency on drug labeling. Because the proposed method exhibited good analytical performance in terms of speed, selectivity, sensitivity, and reproducibility of the measurements, that can be a promising strategy for effective D/L-T4 detection in pharmaceutical industries or other practical samples.     

A simple and effective boundary model in nonequilibrium molecular dynamics method

We propose a simple and effective boundary model in a nonequilibrium molecular dynamics (NEMD) simulation to study the out-of-equilibrium dynamics of polymer fluids. The present boundary model can effectively weaken the depletion effect and the slip effect near the boundary, and remove the unwanted heat instantly. The validity of the boundary model is checked by investigating the flow behavior of dilute polymer solution driven by an external force. Reasonable density distributions of both polymer and solvent particles, velocity profiles of the solvent and temperature profiles of the system are obtained. Furthermore, the studied polymer chain shows a cross-streaming migration towards center of the tube, which is consistent with that predicted in previous literatures. These numerical results give powerful evidences for the validity of the present boundary model. Besides, the boundary model can also be used in other flows in addition to the Poiseuille flow.     

贫燃条件 In-Ag/TiO2-γ-Al2O3催化 CO选择性还原NO

汽车尾气中主要污染成分 CO和 NOx可导致酸雨、光化学烟雾和臭氧空洞效应,对生物、环境及生态系统造成重大危害。污染源中 CO是性能优良的还原剂,如能不添加还原剂实现 CO催化还原 NOx,将成为最具经济技术优势的 NOx脱除技术。在富氧、低温条件下,利用 CO选择性催化还原 NOx为 N2,是目前选择性催化还原研究中的热点和难点。催化 CO还原 NOx常用的贵金属 Ir, Rh, Pt和Pd矿藏稀少,价格昂贵,有氧条件下活性急降,而分子筛催化剂和一些金属氧化物催化剂普遍存在反应温度高,尤其对 N2选择性差等问题。为解决上述问题,需寻找新的适合我国矿产资源的催化体系。研究发现,稀散金属基催化剂对氮氧化物的净化具有一定效果,因而可将我国的稀散金属资源优势转化为技术优势和经济优势。因此,本文以 TiO2-γ-Al2O3(TA)为载体, In/Ag为活性组分,采用等体积浸渍法制备了 InAg/TA以及 In/TA, Ag/TA和InAg/Al (γ-Al2O3为载体)催化剂,考察了贫燃条件下 CO选择性还原NO的催化活性。研究表明,双金属催化剂InAg/Al和 InAg/TA的活性比单金属催化剂In/TA和 Ag/TA高, In/TA催化剂中引入 Ag物种能降低起燃温度;另外,相比于InAg/Al催化剂, InAg/TA催化剂具有较高的催化活性,550?600°C时 N2产率超过60%,说明载体中引入TiO2可以提高催化剂活性。为了深入研究 InAg/TA催化剂中 Ag物种和TiO2对 In物种的作用,通过比表面测定、X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱、紫外-可见光吸收光谱、氢气程序升温还原、傅立叶变换红外线光谱等方法分析了催化剂结构和表面形态。结果表明, Ag物种可以提高 In物种的分散性, In和 Ag物种在 TA载体表面可以很好地分散,从而有利于提高催化活性。 In和 Ag物种在 TA载体表面以氧化态形式存在,并且 Ag物种可以提高 In物种表面含量,表面 In和 Ag物种含量越高,吸附活性位越多,催化活性越高;同时, TiO2也可以促进 NO吸附,从而提高 InAg/TA催化剂活性。 InAg/TA催化剂在450°C连续反应72 h进行稳定性测试,测试前后分别在50?600°C进行活性测试,并用 XRD和 TEM对反应后的催化剂进行表征测试。结果表明, InAg/TA催化剂具有较好的稳定性,连续反应前后催化剂活性基本保持不变,推测可能由于在有 CO和O2存在的体系中, Ag物种利用自身 Ag+与 Ag0之间的氧化还原反应抑制了活性组分 In2O3的还原和聚集,稳定了 In物种乃至催化剂活性。 InAg/TA催化剂用于贫燃条件下CO还原NO具有较好的催化效果,主要归因于催化剂活性组分分散性好,稳定性高,对NO吸附能力强。 Ag物种可以稳定In物种并提高其分散性, TiO2可以改善In物种和Ag物种的分散性并促进NO吸附。